Messingschlager: Win professional equipment for the hobby workshop. Together with Messingschlager we are giving away two times three high-quality workshop basics each worth over 560 euros per set.
Messingschlager has been involved in the German bicycle industry for almost 100 years, and with brands such as Kenda, KMC, Novatech and many others, the company has earned an important place in the component segment. With M-Wave, Messingschlager, based in Baunach near Bamberg, as well as its own accessories brand that offers countless accessories for cyclists - from handlebar bags to bicycle trailers and lighting to workshop equipment. The latter is of particular interest to cyclists and frequent cyclists who often carry out maintenance and repair work, whether installing tubeless tires or bleeding the hydraulic brake system. It goes without saying that you need high-quality equipment for this – for example the following components:
M-Wave Top Assist 2 work stand
An assembly stand is indispensable if you want to work quickly and comfortably on the bike. The top model from M-Wave can be loaded with up to 50 kilos, so that e-bikes can also be attached without any problems; the wide base ensures a secure footing. Of course, the Top Assist 2 is height-adjustable, and the quick-release, soft rubber clamp can be rotated 360°.
Price: € 334,90
M-Wave Air Bullet floor pump
Whether high pressure or large volume: it doesn't work without a floor pump, and now a third property is required. Many tubeless tires have to be inflated all at once when they are fitted for the first time so that they sit airtight in the rim bed. The Air Bullet's air tank makes that possible; the aluminum pump can of course also pump directly into the tyre. The manometer is large and easy to read, the clamping head is suitable for all valve types.
Price: €145
M-Wave TW-4/24 torque wrench
As the old saying goes, "After hard comes off," but with modern bicycles, things are even more serious. Carbon components such as the steerer tube, seat post or handlebars can be damaged by excessive clamping forces and, in the worst case, break - such material must not be mounted without a torque wrench. The TW-4/24 is ideally suited for work on the bicycle, as it covers the torque range that plays a role there - from the components mentioned above to fastening the pedal cranks. The desired torque can be easily set with a rotary knob and seven inserts in the usual sizes are supplied for the ratchet with change of direction.
Price: € 83,90
Win your new Messingschlager workshop set now
Equipped like this, you can (if you can) really work at a professional level – and with Velomotion for free. Because together with Messingschlager we are giving away two sets with the products listed above. If you want to be in with a chance of winning, all you have to do is answer the prize question below correctly. We keep our fingers crossed and hope you have fun screwing!
Legal Brass Beater Raffle:
Your e-mail address will only be saved until the end of the raffle and then deleted - unless you register for the newsletter. But even in this case, no personal data is stored. Mail addresses or other data will not be passed on to third parties (except to Messingschlager).
Consent to the newsletter can be revoked at any time. Your address may only be used by Messingschlager for their newsletter and information about their products and will not be passed on to third parties. Participation in the raffle is not dependent on your consent to the newsletter.
You will receive an email to verify your email address. The winner will be notified by us via e-mail and must reply within ten days whether the prize will be accepted. Otherwise, an alternate winner will be drawn. Anyone aged 18 and over may participate. Members of the editorial team and their relatives are excluded from participation. For technical reasons, delivery can only be made to an address within Germany or Austria. In the case of a necessary export from the EU, the winner has to declare the product himself. If you have any questions, just send us an email ppgad@pucrs.br
The closing date for entries is February 28, 2023
[blog specific=”168883″ posts_per_page=”30″ taxonomy=”post_tag” order=”desc”]